home *** CD-ROM | disk | FTP | other *** search
/ Corel Draw 5 / Corel Draw 5 CD1.iso / scanners.ini < prev    next >
INI File  |  1994-05-18  |  4KB  |  187 lines
  1.  
  2. [SCANNERS]
  3. 0 =Canon
  4. 1 =Epson 
  5. 2 =HP
  6. 3 =HPIIc
  7. 4 =Logitech
  8. 5 =Microtek200
  9.  
  10. [SCANNERSCD]
  11. 6    =Microtek600Z
  12. 7    =UMax630
  13. 8    =UMax1200
  14. 9    =Ricoh50
  15. 10=Ricoh11
  16. 11=Fujitsu
  17. 12=Epson600
  18. 13=AVR
  19.  
  20. [Canon]
  21. Name                 = Canon model CJ-10 or BJ-10
  22. InfSection     = Canon
  23. Options         = 
  24. Notes             = 1
  25. N0                    = This is a TWAIN DLL driver.
  26. Drivers         = 
  27.  
  28. [Epson]
  29. Name                 = Epson 300C
  30. InfSection    = Epson
  31. Options         = 2
  32. O0                     = Port Address,2
  33. O1                     = Resolution,2
  34. O0_0                 = Port 278H (LPT2),
  35. O0_1                 = Port 378H (LPT1),/L1
  36. O1_0                 = 360 300 200 150 100 72 DPI settings,
  37. O1_1                 = 600 480 400 320 240 72 DPI settings,/H
  38. Notes             = 6
  39. N0                     = The Epson interface card defaults to the same address
  40. N1                     = as LPT2. The port address must match the setting on 
  41. N2                     = the interface card. Scanning will be considerably faster 
  42. N3                     = in Standard Mode with this scanner.
  43. N4                     = Running Windows in Enhanced mode enables a virtual device 
  44. N5                     = driver that makes the LPT ports run slower.
  45. Drivers         = 1
  46. D0                  = EPSON.SYS,C,Settings
  47.  
  48.  
  49. [HP]
  50. Name                 = HP ScanJet Plus
  51. InfSection     = HPScanner
  52. Options         = 1
  53. O0                  = Resolution Set,3
  54. O0_0                 = 300 200 180 150 75 50 DPI settings,
  55. O0_1                 = 600 450 300 150 75 50 DPI settings,/0
  56. O0_2                 = 600 500 400 300 200 50 DPI settings,/1
  57. Notes             = 3
  58. N0                     = Make sure your scanner is properly installed.
  59. N1                     = CONFIG.SYS must include a device statement which loads 
  60. N2                     = SJDRIVER.SYS.
  61. Drivers         = 1
  62. ;D0                 = SJDRIVER.SYS,,C,M,
  63. D0                     = HPSCANER.EXE,A,Settings
  64.  
  65. [HPIIc]
  66. Name                 = HP ScanJet IIc
  67. InfSection     = HPScanner
  68. Options         = 1
  69. O0                  = Resolution Set,3
  70. O0_0                 = 300 200 180 150 75 50 DPI settings,
  71. O0_1                 = 600 450 300 150 75 50 DPI settings,/0
  72. O0_2                 = 600 500 400 300 200 50 DPI settings,/1
  73. Notes             = 3
  74. N0                     = Make sure your scanner is properly installed.
  75. N1                     = CONFIG.SYS must include a device statement which loads 
  76. N2                     = SJII.SYS.
  77. Drivers         = 1
  78. ;D0                 = SJII.SYS,,C,M,
  79. D0                     = HPSCANER.EXE,A,Settings
  80.  
  81. [Logitech]
  82. Name                 = Logitech ScanMan/ ScanMan Plus/ ScanMan 256/32
  83. InfSection     = Logitech
  84. Options         = 
  85. Notes             = 6
  86. N0                     = Make sure your scanner is properly installed.
  87. N1                     = CONFIG.SYS must include a device statement which loads 
  88. N2                     = HHSCAND.SYS. 
  89. N3                     = HHSCAND.SYS version 2.00 can be used in either Standard 
  90. N4                     = or Enhanced mode. HHSCAND.SYS version 2.01 or 2.02 should 
  91. N5                     = be used only in Standard mode.
  92. Drivers         = 1
  93. D0                     = SAPI.EXE,A
  94.  
  95.  
  96. [Microtek200]
  97. Name                 = Microtek 200/ 300/ 400/ 600/ 800/ 1850
  98. InfSection     = Microtek
  99. Options         = 1
  100. O0                     = Port Address,6
  101. O0_0                 = Port 100H,/P0
  102. O0_1                 = Port 120H,/P1
  103. O0_2                 = Port 200H,/P2
  104. O0_3                 = Port 220H,/P3
  105. O0_4                 = Port 300H,/P4
  106. O0_5                 = Port 320H,/P5
  107. Notes             = 5
  108. N0                     = Make sure your scanner is properly installed.
  109. N1                     = CONFIG.SYS must include a device statement which loads 
  110. N2                     = MSCAN.SYS. 
  111. N3                     = When using custom resolution, make sure the horizontal 
  112. N4                     = and vertical values are the same.
  113. Drivers         = 1
  114. ;D0                 = MSCAN.SYS,,C,M
  115. D0                     = MICROTEK.EXE,A,Settings
  116.  
  117. [Microtek600Z]
  118. Name                 = Microtek Scanmaker II
  119. InfSection     = MTek600Z
  120. Options         = 
  121. Notes             =    1
  122. N0                    = This is a TWAIN DLL driver.
  123. Drivers         = 
  124.  
  125.  
  126. [UMax630]
  127. Name                 = UMAX UC630
  128. InfSection     = UMax630
  129. Options         = 
  130. Notes             =    1
  131. N0                    = This is a TWAIN DLL driver.
  132. Drivers         = 
  133.  
  134.  
  135. [UMax1200]
  136. Name                 = UMAX UC1200S
  137. InfSection     = UMax1200
  138. Options         = 
  139. Notes             =    1
  140. N0                    = This is a TWAIN DLL driver.
  141. Drivers         = 
  142.  
  143.  
  144. [Ricoh50]
  145. Name                 = RICOH IS50/ IS60/ IS410/ FS2
  146. InfSection     = Ricoh50
  147. Options         = 
  148. Notes             =    1
  149. N0                    = This is a TWAIN DLL driver.
  150. Drivers         = 
  151.  
  152.  
  153. [Ricoh11]
  154. Name                 = RICOH IS11
  155. InfSection     = Ricoh11
  156. Options         = 
  157. Notes             =    1
  158. N0                    = This is a TWAIN DLL driver.
  159. Drivers         = 
  160.  
  161.  
  162. [Fujitsu]
  163. Name                 = FUJITSU ScanPartner 10/M3096Gm/Hm
  164. InfSection     = Fujitsu
  165. Options         = 
  166. Notes             =    1
  167. N0                    = This is a TWAIN DLL driver.
  168. Drivers         = 
  169.  
  170.  
  171. [Epson600]
  172. Name                 = Epson ES-600C SCSI only
  173. InfSection     = Epson600
  174. Options         = 
  175. Notes             =    1
  176. N0                    = This is a TWAIN DLL driver.
  177. Drivers         = 
  178.  
  179.  
  180. [AVR]
  181. Name                 = AVR8000
  182. InfSection     = AVR
  183. Options         = 
  184. Notes             =    1
  185. N0                    = This is a TWAIN DLL driver.
  186. Drivers         = 
  187.